Tap this button to block or unblock a street. You can block or unblock the
street in one or both directions.
For example, to correct a street near to your current location, do the following:
1. Tap (Un)block street.
2. Tap Near you to select a street near your current location. You can select
a street by name, a street near your Home location or a street on the map.
3. Select the street or section of a street you want to correct by tapping it on
the map.
The street you select is highlighted and the cursor shows the name of the
street.
4. Tap Done.
Your device shows the street and whether the traffic is blocked or allowed
in each direction.
5. Tap one of the direction buttons to block or unblock the flow of traffic in
that direction.
6. Tap Done.
Reverse traffic
direction
Tap this button to correct the traffic direction of a one-way street, where the
direction of traffic is different from the direction shown on your map.
Note: Reverse traffic direction only works for one-way streets. If you select
a two-way street you will be given the chance to block/unblock the street
rather than changing the direction.
Tap this button to change the name of a street on your map.
For example, to rename a street near to your current location:
1. Tap Edit street name.
2. Tap Near you.
3. Select the street or section of a street you want to correct by tapping it on
the map.
The street you select is highlighted and the cursor shows the name of the
street.
4. Tap Done.
5. Type the correct street name.
6. Tap Done.
To Next Page
Loading...
