Tone Americana EVIL ROBOT User Manual

ON/OFF function for tubes. Always power on first and let tubes warm up for 1 minute before usage for best sound and performance.

Replace with 2 AMP/250VAC slow blow for power surge or shorted tube. Protects transformers and tubes from excess current.

Can be used with an 8 ohm extension cabinet. Internal speaker is disabled when extension is plugged in. Cabinet should be rated at 8 ohms for full 18W power.

Input A for maximum gain, rock tone. Input B for A/B switch or other instruments/microphones.

Grooms tone: Mellow (darker, low freq), Normal (low/high freq), Bright (highs upfront, more growl). Works with A inputs; B has 2 modes (high/low tones).

Volume control for Input A. Works with Tone Control. Max for gain, 12 o'clock for clean. Bright mode only at max volume.

Controls overall tone and adds gain. Max bass at 0, max highs at 5 o'clock.

Point to point, no circuit board, extreme hand wired.

100VAC, 120VAC, and 240VAC – 50/60Hz - UL and CE transformers, USA and International.

Opening chassis may cause electrical shock. All service work except tube replacement must be performed by qualified electrician or Tone Americana.

Amplifier does not need biasing when changing output tubes; bias function is fixed.

One year warranty for parts and labor excluding tubes. Tubes warranted for 30 days.