TOORX BRX 300 - User Manual

Ed : 02/17
INSTRUCTION
Rev: 0000

Summary

ASSEMBLY INSTRUCTIONS - Part 1

Step 1: Attach Front Stabilizer

Attach the front stabilizer to the main frame using specified washers and screws.

Step 2: Attach Rear Stabilizer

Attach the rear stabilizer to the main frame using specified washers and screws.

Step 3: Attach Saddle Post

Loosen the knob, attach the saddle post to the main frame, and then tighten the knob.

ASSEMBLY INSTRUCTIONS - Part 2

Step 4: Attach Saddle and Covers

Attach saddle, decoration covers using specified screws and knobs.

ASSEMBLY INSTRUCTIONS - Part 3

Step 5: Attach Upright Post Trim and Cover

Attach upright post trim strip and cover to the upper upright post.

Step 5 (Cont.): Connect Wires and Attach Upright Post

Connect communication wires and attach the upright post with various hardware.

Step 6: Attach Handlebar

Connect handlebar wires, attach handlebar, and secure with clamp ring and knob.

ASSEMBLY INSTRUCTIONS - Part 4

Step 7: Connect Console and Handlebar Covers

Step 8: Attach Pedals

ASSEMBLY INSTRUCTIONS - Part 5

Step 9: Attach Bottle Holder

Operating the Console

Power On and Initial Setup

Workout Program Modes

Manual Workout Mode

Program Workout Mode

Advanced Workout Modes

Heart Rate Control (H.R.C.) Modes

Specific Workout Features

WATT Workout Mode

Body Fat Measurement Mode

TOORX BRX 300 Specifications

General

Braking System	Magnetic
Resistance Type	Manual
Resistance Levels	8
Flywheel Weight	6 kg
Console Display	LCD
Heart Rate Monitoring	Hand Pulse