16
Figure 4-4
4.2.2 Scan
Scan detects the systems supported by the vehicle and retrieves
DTCs for all of these systems, providing a complete health check of
your vehicle. Performing Scan before and after repair could help in
troubleshooting and validating repairs. Pre and post scan reports
can allow you to record the condition of the vehicle before and
after repair for comparison.
To perform a Scan, tap the Scan button. The CarPal will start
scanning all the systems supported by the vehicle, and DTC
retrieval will be automatically proceeded.
Results are displayed progressively as the systems are scanned. Tap
the system with DTCs to view the detail information of the DTCs.
To Next Page
Loading...