29
4.11.1 Performing a Vehicle Performance Test
1. Tap Performance Test from the home screen.
2. A warning message appears. Carefully read the message and tap
OK to continue.
4.10 I/M Readiness
4.11 Performance Test
This function checks whether or not the various emission-related
systems on the vehicle are operating properly, and are ready for I/M
(Inspection and Maintenance) testing.
It can also be used to check the monitor running status and to
conrm if the repair of a car fault has been performed correctly.
Note:
The vehicle should only be considered ready for inspection and
allowed to pass emissions if all required tests have been passed.
Vehicle Performance Test allows you to make accurate
measurements of vehicle acceleration, providing results at intervals
dened by set speed and xed distance measurements.
To Next Page
Loading...