RECHARGE THE JUMP
STARTER
A Guide To The LED Light:
The JUMPSURGE3000 comes partially charged and needs
to be fully charged before use. Please charge your jump
starter through the Type-C In port once you receive it.
Note:
Only jump-start vehicles when the battery level of the jump
starter is above 50%.
Press the Power Button once to turn on the jump-
starter.
Press and Hold the Power Button for 3 Seconds to
turn on the LED Light. Then Press the Power Button once to
toggle between Flashlight, Strobe, SOS, and POWER OFF.
EN | 9
To Next Page
Loading...
