33
Component Test
This function helps send control commands to the vehicle's ECU as
a way to test and operate the system parts and components.
Vehicle Information
This function displays a list of information (provided by the vehicle
manufacturer) from the vehicle’s ECU.
The information may include:
• VIN
• Calibration ID (CID)
• Calibration Verication Number (CVN)
4.2.3 Diagnostic Feedback
The TopScan allows you to instantly send diagnostic feedback
(with logs of diagnostic data automatically attached) while you are
encountering a software problem with the diagnostics operations.
To send diagnostic feedback:
1. Tap the icon located at the top right corner of any screen in
the Diagnostics module.
2. Select the type of problem.
3. Write a description of the problem.
Note:
The Diagnostic Feedback function is only available for the
Diagnostics module.
To Next Page
Loading...
