Function of parts and wiring
(1)Lens mount
Use CS mount lens or C mount lens with
the attached 5mm adaptor ring.
(2)Video signal output connector (BNC
connector)
Connect to CCTV monitor by using a
coaxial cable.
(3)V.D./D.D. switch
Switch to Video Drive (V.D.) for auto iris
lens w/EE AMP. Switch to Direct Drive
(D.D.) for auto iris lens w/o EE AMP.
(4)Auto iris connector
Connect the cable from auto iris lens to the
pin no. 1 to 4 on camera according to the
fllowing Instruction.
6
To Next Page
Loading...