Drawing 10148 REV 0 24-11-15
Electric Agitator Instructions
8 INSTRUCTIONS FOR MAINTENANCE
For a longer life of the equipment it is sensible to foresee an accurate maintenance of it,
replacing, when necessary, the worn parts such as bearings, oil seal rings, rubber pegs of the
flexible coupling, seals and packing. The operations of disassembly and assembly of the
mechanical seals must be carried out by skilled persons, with maximum precision and cleaning.
Following, a number of instructions of a general nature are described regarding the operations
to be carried out for the replacement of a mechanical seal in the case of an agitator “from
above” and a “lateral” agitator.
IMPORTANT NOTICE
Agitators manufactured by our company comply with the safety regulations in force and are
supplied with CE label. They should be installed on tanks or vessel that is part of plants which
should in general comply with the safety regulations in force.
-It is strictly forbidden to run the agitator unless correctly installed; It is strictly forbidden to
run the
agitator after installation, without safety measures necessary to prevent access to agitator while
operating.
To Next Page
Loading...