topmark KAYA - Using the Tricycle; Installing the Balance Bike; Transforming to Tricycle; Adjusting Handlebar and Seat

14
EN
ASSEMBLING/USING
Check if all spare parts are in the box (see page 2).
Note that colour pictures and stroller accessories on this product in this instrucon
manual may vary from that of the product that you have purchased.
If one or more of the above menoned spare parts are missing or broken, please
contact the store where you bought the product, before using.
WARNING
Please keep all packaging material away from babies and children, to
prevent suocaon.
How to install the balance bike .
1. Insert in the handle bar and make sure it is ed in place (1a) . Insert the front
wheel to the tricycle chassis (1b). Pull rmly on the handle bar and front wheel
to be sure it is securely aached to the chassis.
WARNING: The maximum bearing weight for the handle of tricycle is
0.5kg.
How to transform to a tricycle
2. Press down the buon and pull out the pedals.
3. Insert the pedals directly into the front wheel sockets and make sure they are in place
when you hear a "click".
4. Press down the boom buon and take rear wheels apart.
5. Pull up the buon and rotate the rear wheel outward at the same me.
How to adjust handle angle
6. The angle of handlebar can be adjusted accordingly to the baby’s needs. When adjust
the angle forward, pull up the buon and push forward the handlebar at the same
me, and then do remember to pull up the handlebar a lile bit unl you heard "click",
which means this posion locked. If you want to adjust the angle back straight, just pull
up the buon and pull back the handlebar, it will be ok.
How to adjust the seat height
7. Loosen the screw with a screwdriver to adjust the height, then ghten the screws.
Make sure it's ght!