topmark KAYA - Care and Maintenance; Product Care and Cleaning; Maintenance Tips and Storage

16
To prolong the life of your nursery product, keep it clean and do not leave in the
direct sunlight for extended periods of me.
Check the wheels regularly for wear and make sure that there is no dust and sand
between the axles and wheels.
When cleaning the bike, please wipe it with a dry coon cloth. For a large amount of
mud, rinse it with water and wipe it o with a coon cloth as soon as possible.
Allow it to dry completely before folding or storing it away.
Aenon: Sand causes corrosion on wheels and may cause damages on a parquets-,
laminate-, linoleum– or carpet oor.
Helpful hints
For the rotang parts of the product, such as axles, handlebar shas, etc., solid
grease (or an-rust lubricant spray) should be added regularly to improve product
life.
If the wheels squeak, use a silicon based spray ensuring it penetrates the wheel and
axles assembly.
When storing and transporng this product, disassemble the product according to
the steps described in the manual, and wrap it with shock-proof materials (such as
cloth, paper, foam lm), and package.
In some climates the covers and trims may be aected by mould and mildew. To help
prevent this occurring, do not fold or store the product if it is damp or wet. Always
store the product in a well venlated area.
Always check parts regularly for ghtness of screws, nuts and other fasteners, ght-
en if required. To maintain the safety of your product, seek prompt repairs for bent,
torn, worn or broken parts.
Use only parts and accessories approved by the supplier.
EN
CARE AND MAINTENANCE