EasyManua.ls Logo

topmark PARKER T7039 - Page 14

topmark PARKER T7039
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
EN
ASSEMBLING/USING
TO FOLD
1. Take out maress base. It is not needed to zip o the second
layer before folding, just take out the maress and metal tubes.
2. To unlock the second lock on the boom:
(Note: when using the second layer, put your hands through
the hole).
Push down the middle part (2nd lock) with one hand and with
the other hand pull onto the red belt unl you hear a click to
unlock this part for folding. Than li up the belt to half height of the playpen.
3. To unlock the top rails
you have to li up and
push the buon (under the
fabric near the arrow) at
once and then you have to
bring down the top rail correctly in
one movement. Repeat for all rails
and fold.
4. Pull fully boom strap and gather four
stands to centre.
5. Wrap playpen with maress base. Fasten Velcro buon.
6. Put playpen into carry bag.
66
2
4
45
3
1

Related product manuals