Notice
a. Please use DC 12V power adaptor with standard 5φ power jack for power charging.
b. To support the DC 12V output to a CCTV camera, a proper power cable with F-M adaptor cable
may necessary.
c. When the requirement of the camera is higher than 1A, the CCTV tester will enter protection
mode. Disconnect all the connections of the CCTV tester and then connect the CCTV tester
with power adaptor to resume the CCTV tester.
5 Audio input
Test the audio input from pickup devices. Connect the TESTER and pickup
device with the RCA audio jack.
To Next Page
Loading...