Tork Elevation H2 Xpress - Parts and Replacements; Parts List with Replacement SKUs; Part Replacement Instructions

Washroom Dispenser Service and Parts Manual
Tork Elevation H2 Xpress Towel Dispenser
552020; 552028
Revision Date: 3-12-18
2 of9
Essity Internal
Parts
Part Description Replacement SKU
H2 ELEV HOOD (W hite) 225520A
H2 ELEV HOOD (Black) 225521A
ELEVATION LOCK
(W hite)
ELEVATION LOCK
(Black)
200260 KEY FOR ALL
TORK DISPENSERS
205502
205503
200260 KEY
Part Description with Replacement Instructions
Parts with SKUs listed are available for order as of the revision date on the manual. Contact an
Essity Sales Representative or the Essity Quality Coordinator to order these parts.
If no SKU is listed, the availability of the part is unknown. Please contact the Essity Quality
Coordinator for more information (see Contacting Essity section).
Replacement SKU Description & Replacement Instructions
225520A
225521A
H2 ELEVATION HOOD (White or Black)
The hood for the 552020 or 552028 can be removed without any tools. Open the
cover. Start at the bottom hinge. Push hinge pivot on cover up to disengage from
back. Once bottom hinge is free, top hinge can then be pushed over rib and cover
can be removed.
205502
205503
ELEVATION LOCK (W hite or Black)
The lock can be replaced by pressing the plastic tabs on each side to free the lock
from the opening. A new lock can be snapped in place.
200260 KEY
200260 KEY FOR ALL TORK DISPENSERS