Preventive
Maintenance
The dispenser should be cleaned any time there is heavy paper dust build-up inside the dispenser. If
paper dust is not a problem,
approximately
every year is a good
frequency
for cleanings. The following is
the
recommended
procedure to cleaning:
1) Open the dispenser and remove the remaining towels.
2) Clean out any paper dust. This can be done is several ways, such as, vacuuming, blowing out with a
can of
compressed
air (wear safety glasses), wiping out with a damp cloth, etc.
3) Clean the cover with a general all-purpose cleaner that is safe for plastics.
Troubleshooting
Problem: Any
paper-related
problem.
Take note of the date code on the outside of the case of paper product on inside on the TorkSelect label.
Then contact the Essity Quality Coordinator and explain the problem.
Problem: Any other problem not stated above.
•
Contact the Essity Quality Coordinator.
To Next Page
Loading...