TECHNICAL DOCUMENT
TORMACH.COM
Page 1
©Tormach® 2020. All rights reserved.
Specicaons subject to change without noce.
TD10487_PCNC440_ATC_Install_1220A
PCNC 440 AUTOMATIC TOOL CHANGER
Product Idencaon: Automac Tool Changer for PCNC 440 (PN 35900)
Purpose: This document details the installaon and use of the Automac Tool Changer on a PCNC 440 mill.
Qty.
PCNC 440 Automatic Tool Changer PN
2 Adjustable Stando Assembly 35833
1 ATC Assembly —
1 Fixed Stando Assembly 35832
1 PCNC 440 Coolant Relocaon Bracket Kit 37260
10 Plasc Screw 32173
1 Tilt Stando Assembly 35911
NOTE: If any of these items are missing, contact Tormach
Customer Service at (608) 849-8381 for a replacement.
IMPORTANT! Please read this secon before you begin installing your Automac Tool Changer (ATC).
• Power Drawbar You must install the PCNC 440 Power Drawbar on your machine before installing the
PCNC 440 Automac Tool Changer (ATC). Do not install the power drawbar buon; tool changes are
completed with the ATC.
• PathPilot You must update your controller to the latest version of PathPilot before installing and
operang the ATC. If you don’t, there’s a risk that the ATC could become inoperable. Follow the
instrucons detailed in “Before You Begin” on page 3.
To Next Page
Need help?
General
