Need help?Do you have a question about the tormek KJ-45 and is the answer not in the manual?
Guides on setting up the Tormek machine for optimal use with the KJ-45 jig.
Details the adjustable clamp, fixed stops, screw, and knob of the KJ-45 centering knife jig.
Step-by-step instructions for securely attaching various knives to the KJ-45 jig.
Method for matching the knife's current sharpening angle using the EM-15 marker and jig.
Guidance on establishing and verifying new bevel angles with the WM-200 AngleMaster.
Specific technique for setting edge angles on thin-bladed knives using the angle setter.
Suggestions for optimal sharpening angles based on different knife categories.
Detailed procedure for grinding the knife edge using the jig and Universal Support.
Explanation of sharpening away from the edge, its limitations, and factors to consider.
Instructions for removing the burr and achieving a sharp edge using the honing wheel.
Specific honing methods for straight drawknives and wood splitting knives.
Setup instructions for the Tormek machine when using the wider KJ-140 jig.
Details the wider clamp and intended use of the KJ-140 for flexible blades longer than 160mm.
To Next Page
General
