tormek T-2 - Tormek T-2 Spare Part List

63
EN
Spare part list
No. Denomination Qty Part no.
1 Grinding wheel 1 6078
2 Housing 1 3020 (230V)
3060 (115V)
3 Grating 1 3185
4 Drive wheel with friction ring 1 3208-07 (230V)
3186-07 (115V)
5 Honing wheel 1 3670-07
6 Mounting shaft 1 1400
7 * Bushing for mounting shaft 3 3128
8 * Distance spring for the motor 1 0770
9 Main shaft 1 1048
10 Motor 120 W 1 6168 (230V)
6010 (115V)
11 Nylon bearing 2 3061
12 Rubber foot 4 3198
13 * Machine label 1 7750 (SE/EN)
7770 (EN/FR)
14 Cord set 1 6031 (SE)
6041 (CH)
6043 (US)
6050 (JP)
6053 (GB)
6055 (AU)
6057 (ZA)
No. Denomination Qty Part no.
15 Strain relief 1 6081 (230V)
6191 (115V)
16 Switch 1 6320 (230V)
6330 (115V)
17 Washer for the drive wheel 1 5081
18 Washer for the honing wheel 1 5350
19 Nut M12 h=6 1 1051
20 Locking pin 1 5071
21 Screw for grating 4 5191
22 EzyLock 1 3520
23 Jig 1 2480
24 Clamp 1 3690
25 Pointer 1 3680
26 Axis holder 1 2490
27 Axis 1 1420
28 Screw M5×10 6 5590
29 Machine head 1 2440
30 * Screw M4×8 2 5600
31 Magnet 1 5370
32 Locking screw 1 1185
* Not shown on drawing
Weight machine only: 6.3 kg (13.9 lbs)