8
EN
• The machine should be operated on a at, stable surface. Keep work area
clean. Cluttered areas and benches invite accidents. Keep work area well lit.
• All children or visitors should be kept at a safe distance from the work area.
• Make workshop kid proof with padlocks or master switches.
Grounding Instructions
• In the event of a malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This tool is
equipped with an electric cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided – if it will not t the outlet,
have the proper outlet installed by a qualied electrician.
• Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. The conductor with insulation having an outer surface
that is green with or without yellow stripes is the equipment-grounding
conductor. If repair or replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conductor to a live terminal.
• Check with a qualied electrician or service personnel if the grounding instructions are
not completely understood, or if in doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the tool’s plug.
• Repair or replace damaged or worn cord immediately.
• This machine is intended for use on a circuit that has an outlet that looks like
the one illustrated in Sketch A in Figure 82.1. The tool has a grounding plug that
looks like the plug illustrated in Sketch A in Figure 82.1. A temporary adapter,
which looks like the adapter illustrated in Sketches Band C, may be used to
connect this plug to a 2-pole receptacle as shown in Sketch B if a properly
grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a qualied electrician. The
green-colored rigid ear, lug, and the like, extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box.
To Next Page
Loading...
Need help?
General