8
LOOSE PARTS CHART
Note: Use this chart as a checklist to assure all parts necessary for assembly have been received. Without these
parts, total setup cannot be completed. Some parts may have already been assembled at factory.
PART DESCRIPTION QTY. USE
Wheel Assembly 3 Mount to wheel hubs
Steering Wheel 1
Jam Nut 1 Mount to steering shaft
Cover 1
Screw 1
Hood Lock Bracket 1
Screw - 1/4-20 x 1-1/2" lg. 1 Mount to hood for European Compliance
Flat Washer - 1/4" 1
Lock Nut - 1/4-20 1
Exhaust Guard 1 Mount to machine for European Compliance
Self Tapping Screw 4
ROPS 1
Flange Head Capscrew 4 Mount to frame
Flange Nut 4
Hose Clamp 1 Secure vent hose to vent tube of ROPS
Lift Arms 2
Pivot Rod 2 Install pivot rods to lift arms
Capscrews5/16- 18 x 7/8"Lg. 2 (supplied with Lift Arm kit)
Thrust Washers 2 Mount cutting units to lift arms
Lynch Pin 2 (supplied with Lift Arm kit)
Key 2
Inclinometer 1 Use for site survey before operating machine
EEC Decal 4 Affix to machine for European Compliance
EEC Certificate 2
Operators Manual 2 Read before operating machine
Parts Catalog 1
Operator Video 1 View before operating machine
Engine Manual 1
Pre-Delivery Check List 1 Fill out before delivery to customer
Registration Card 1 Fill out and send to the Toro Co
Specifications and design subject to change without notice.
To Next Page
Loading...
