10
Specifications
GENERAL SPECIFICATIONS:
Width-of-Cut: 205 cm (81 in)
Ov
erall Width:
Cutting Units Raised. 165 cm (65 in)
Cutting Units Down 228 cm (90 in)
Ov
erall Length: 254 cm (100 in)
Height
: 147 cm (58 in)
With Roll Over Protection
System installed 208 cm (82 in)
Recommended Height-of-Cut:
5-Blade Cutting Unit: 2.54–10 cm (1–4 in)
7-Blade Cutting Unit: 1.27–5 cm (1/2–2 in)
11-Blade Cutting Unit: .95–1.9 cm (3/8–3/4 in)
W
heel Tread:
(Front). 132 cm (52 in)
(Rear) 111.8 cm (44 in)
W
heel Base: 132 cm (52 in)
Dr
y Weight:
2-Wheel Drive with 5-Blade Cutting Units &
skids = 980 kg (2,625 lbs)
2-Wheel Drive with 7- or 11-Blade Cutting Units
& rollers = 1092 kg (2,925 lbs)
4-Wheel Drive with 5-Blade Cutting Units &
skids = 1017 kg (2,725 lbs)
4-Wheel Drive with 7- or 11-Blade Cutting Units
& rollers = 1129 (3,025 lbs)
To Next Page
Loading...
