Reelmaster 7000−DPage 7 − 8Axles, Planetaries and Brakes
9. Check and adjust brake cables for proper brake op-
eration (see machine Operator’s Manual).
10.Remove jack stands and lower machine to ground.
Tighten wheel lug nuts in a crossing pattern from 85 to
100 ft−lb (116 to 135 N−m).
11. Check and adjust brake cables for proper brake op-
eration (see machine Operator’s Manual).
12.Remove jack stands and lower machine to ground.
Tighten wheel lug nuts in a crossing pattern from 85 to
100 ft−lb (116 to 135 N−m).
To Next Page
Loading...
