Toro 04042 - Page 187

InstallingtheSamsungBatteryController(continued)
3.Ensurethatthecontrollercables,componentsandpostsareingood
condition.
4.Connectthebatterypositive-powerinfrombatterycable(item5inFigure
128)tothebatterypositivepostinthecontrollerandsecurewithawasher
andnut.
5.Connectthebatterynegative-powerinfrombatterycable(2)tothebattery
negativepostinthecontrollerandsecurewithawasherandnut.
6.ConnecttheCOMportwireharnesses(3)tothecontroller;refertoFigure
128.
7.Connectthepositive-powerouttomachinecable(6)tothecontroller;refer
toFigure128.
8.Connectthenegative-powerouttomachinecable(1)tothecontroller;
refertoFigure128.
9.Coatthecontrollerpostsandcableconnectorswiththebatteryterminal
protectortopreventcorrosion.
10.Installthecontrollerontothemountbracketandsecurewiththe4bolts,
washersandnuts.
11.Ifremoved,installtheTECcontrollertothemountbracketasbelow:
A.InstalltheTECcontrollertothemountbracketandsecurewith2bolts
andangenuts;refertoFigure127.
B.ConnecttheconnectorstotheTECcontroller.
12.Ifremoved,installtherelaytothemountbracketasbelow:
A.Installtherelaytothemountbracketandsecurewith2boltsandlock
nuts;refertoFigure127.
B.Connecttheconnectorstotherelay.
13.Installthecontactorontothemountbracketandsecurewith2boltsandnuts.
14.Connectthecableconnectorstothecontactorasnotedduringdisassembly.
15.InstalltheSamsungbatterypackontothemountbracket;refertoInstalling
theSamsungLithiumBatteryPack(page5–81).
16.Installthebatterycoverontothemountbracketandsecurewith8bolts.
17.Connectthebatterypack;refertoConnectingtheLithiumBatteryPack
(page5–7).
Greensmaster
®
eFlex1800,2100and2120
Page5–87
ElectricalSystem:ServiceandRepairs
12189SLRevE