Toro 04042 - Page 235

InstallingtheRearRoller
1.Placethecuttingunitonalevelworkingsurface.
Note:RefertoCuttingUnitOperator’sManualfornumberofrollershims
requiredforvariousheight-of-cutsettings.
2.Ifboththerearrollerbracketswereremovedfromthecuttingunitsideplate,
positionthebracketsandrollershimsto1ofthesideplates.Installthe2
carriagescrewsand2angenutstoretainthebracketinposition.Donot
fullytightentheangenuts.
3.Slidetherearrollershaftintotherearrollerbracketattachedtothecutting
unit.Slidethesecondrearrollerbracketontotheotherendoftherollershaft.
Securethesecondrollerbracketandshimstocuttingunitsideplatewiththe
2carriagescrewsand2angenuts.Donotfullytightentheangenuts.
4.Centertherearrollertothecuttingunitandsecureinplacebytightening
the4angenuts.
5.Adjustthecuttingunit;refertotheCuttingUnitOperator'sManual.
6.Installthecuttingunittothemachine.
7.Afterallnecessaryadjustmentshavebeenmade,connectthebatterypack;
refertoConnectingtheLithiumBatteryPack(page7–3).
Greensmaster
®
eFlex1800,2100and2120
Page7–21
CuttingUnit:ServiceandRepairs
12189SLRevE