Toro 04044 - Page 186

RemovingtheGearBoxAssembly(continued)
g323372
Figure5
1.Damagedinputshaftassembly4.Weldsideofreelsupportplate
2.Driveshaftremovaltool
5.Prybar
3.Reelshaft
H.Insertalong-handledprybar(3/8x12inchwithscrewdriverhandle
recommended)throughthebottomofthecuttingunit.Theprybarshould
passbetweenthetopofthereelshaftandthebacksofthereelbladesso
thatthereelwillnotmove.
IMPORTANT
Toavoidgrindingthereel,donotcontactthecuttingedgeof
anybladewiththeprybarasthismaydamagethecuttingedge
and/orcauseahighblade.
I.Movetheprybaragainsttheweldsideofthereelsupportplateclosestto
thedriveshaftassembly.
J.Usethedriveshaftremovaltoolonthelargeatsofthedriveshaft
assembly;refertoDriveShaftRemovalTool(page9–6).
K.Restthehandleoftheprybaragainstthefrontrollerandturnthedrive
shaftcounterclockwisetoloosenitfromthereel.
11.Tipthecuttingunitbackontoitsrollers.
12.Cleanthethreadsintheendofthereelshaft.Aright-handthreadand
left-handthreadtapisavailabletocleanorrepairthethreadsifnecessary;
refertoReelThreadRepairTaps(page9–6).
UniversalGroomer(Optional):ServiceandRepairs
Page9–12
GreensmasterFlex1800/1820/2100/2120
12188SLRevD