tion, keep all nuts, bolts and screws properly
tightened.
28. To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and
accumulation of dirt.
29. If the engine must be running to perform a main-
tenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the engine
and any moving parts. Keep everyone away.
30. Do not overspeed engine by changing governor
settings. Maximum engine speed is 3650 rpm. To
assure safety and accuracy, have an Authorized
TORO Distributor check maximum engine speed
with a tachometer.
31. If major repairs are ever needed or assistance is
required, contact an Authorized TORO
Distributor.
32. To be sure of optimum performance and safety,
always purchase genuine
TORO replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous.
Altering this vehicle in any manner may affect
the vehicle’s operation, performance, durability
or its use may result in injury or death. Such use
could void the product warranty of The TORO
Company.
33. This vehicle should not be modified without the
TORO Company’s authorization. Direct any
inquiries to:
The TORO Company
Commercial Division
Vehicle Engineering Department
300 West 82nd St.
Bloomington, Minnesota 55420 USA
Sound & Vibration Levels
Sound Levels
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 85 dB(A)
(3300-D,88 DB(A) (4300-D) based on measurements
of identical machines per 84/538/EEC.
This unit has a sound power level of 101
dB(A)/1pW, based on measurements of identical
machines per procedures outlined in Directive
79/113/EEC and amendments
Vibration Levels
This unit has a vibration level of 6.0 m/s
2
at the pos-
terior, based on measurements of identical machines
per ISO 2631 procedures.
This unit does not exceed a vibration level of 0.5
m/s
2
at the posterior based on measurements of iden-
tical machines per ISO 2631 procedures.
Safety
6
To Next Page
Loading...