Toro 23518 - Page 32

CHASSIS
3-4
Toro 30” Aerator Service Manual
3
6. Remove the grease seal from the bottom of the
caster wheel pivot tube (Fig. 014).
8. If replacing the wheel bearings, use a blunt punch to
remove the upper and lower bearing cups from the
caster wheel pivot tube (Fig. 016).
Fig. 014 DSC-00146a
7. Remove the lower tapered roller bearing (Fig. 015).
Fig. 015 DSC-00149
Fig. 016 DSC-00152
9. Remove the nut securing the caster wheel axle bolt,
then remove the axle bolt (Fig. 017).
Fig. 017 DSCN-0376a