HYDRAULICS & ENGINE MOUNTING
4-16
Toro 30” Aerator Service Manual
4
Fig. 105 connector
14. Remove the two front mount bolts and the three
mounting bolts on each side of the machine (Fig.
107).
Fig. 107 tightener bolt
13. Support transaxle with a jack (Fig. 106).
Fig. 106 IMG-0019
12. Disconnect the parking brake switch wire connector
(Fig. 105).
15. Slowly lower the jack to gain access to the drive belt.
While lowering, work the belt off the PTO shaft of
the engine (Fig. 108). Once the belt is off, lower the
transaxle out of the chassis.
Fig. 108 belt
To Next Page
Loading...
