5
Safety
deterioration.
6. Replace worn or damaged parts for safety.
7. If the fuel tank has to be drained, this should be
done outdoors
8. On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
9. When machine is to be parked, stored or left
unattended, lower the cutting means unless a
positive mechanical lock is used.
Sound & Vibration Levels
Sound Levels
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 89 dB(A),
based on measurements of identical machines per
91/386/EEC.
This unit has a sound power level of 104 LWA,
based on measurements of identical machines per
procedures outlined in Directive 84/538/EEC and
amendments
Vibration Levels
This unit has a vibration level of 8.7 m/s
2
at the
hands/arms, based on measurements of identical
machines per ISO 5349 procedures.
This unit has a vibration level of 0.1 m/s
2
at the pos-
terior based on measurements of identical machines
per ISO 2631 procedures.
To Next Page
Loading...
