Toro 30301TC User Manual

FORM NO. 3326-938
The TORO COMPANY - 2001
OPERATOR'S
MANUAL
2 & 4 WHEEL DRIVE TRACTION UNITS
GROUNDSMASTER® 3000-D
MODEL NO. 30301 - 220000001 & UP
MODEL NO. 30301TC - 220000001 & UP
MODEL NO. 30302 - 220000001 & UP
MODEL NO. 30302TC - 220000001 & UP
To understand this product, and for safety and
optimum performance, read this manual before
starting the engine. Pay special attention to SAFETY
INSTRUCTIONS highlighted by this symbol.
It means CAUTION, WARNING or DANGER -
personal safety instruction. Failure to comply with
the instruction may result in personal injury.
The GROUNDSMASTER 3000-D conforms to the
B71.41999 specifications of the American National
Standards Institute's safety standards for riding
mowers: thus, TORO proudly displays the ANSI
safety seal.

Toro 30301TC Specifications

General

Model	30301TC
Type	Walk Behind Mower
Cutting Width	21 inches
Power Source	Gasoline
Engine Displacement	159 cc
Starter	Recoil
Engine Type	4-Cycle
Drive System	Rear-wheel drive
Cutting Height	1 inch to 4 inches
Weight	80 lbs
Oil Capacity	20 oz
Wheel Size	8 inches front / 10 inches rear