• T he engine m ust be shut off before c hec king
the oil or adding oil to the crankcase .
• If major re pairs are ev er needed or if assistance
is desired, contact an A uthorized T oro
Distributor .
• T o mak e sure of optim um perfor mance and
contin ued safety cer tification of the mac hine ,
use only g en uine T oro re placement par ts
and accessories . R e placement par ts and
accessories made b y other man ufacturers could
be dang erous , and suc h use could v oid the
product w ar ranty .
Sound Pressure Level
T his unit has an equi v alent contin uous A-w eighted
sound pressure lev el at the operator ear of 89 dB A,
based on measurements of identical mac hines per
EN 11094 and EN 836.
Sound Power Level
T his unit has an equi v alent contin uous A-w eighted
sound po w er lev el at the operator ear of 105
dB A/1 pW , based on measurements of identical
mac hines per EN 11094.
Vibration Level
Hand-Arm
T his unit has an equi v alent contin uous A-w eighted
hand/ar m vibration lev el of 2.5 m/s
2
, based on
measurements of identical mac hines per EN 1033.
Whole Body
T his unit has an equi v alent contin uous A-w eighted
hand/ar m vibration lev el of 0.5 m/s
2
, based on
measurements of identical mac hines per EN 1033.
Safety and Instructional Decals
Safety decals and instr uctions are easily visible to the operator and are located near any
area of potential dang er . R e place any decal that is damag ed or lost.
93-7272
1. Cutting/dismemberment hazard; fan—stay away from
moving parts.
93-7275
1. Read the Operator’s Manual.
2. Do not use starting aids.
93-7818
1. Warning—read the Operator’s Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N•m (85 to 110
ft-lb).
100-5623
1. Low height of cut
adjustment
2. High height of cut
adjustment
8
To Next Page
Loading...
