Groundsmaster 4000--D/4010--D Hydraulic SystemPage 4 -- 143
Lift/Lower Manifold Service (Fig. 112)
WARNING
If lift/lower manifold is attached to machine,
make sure that cutting decks are fully lowered
before loosening hydraulic lines, cartridge
valves or plugs from lift/lower manifold. If decks
arenotfullyloweredwhenmanifoldcomponents
are loosened, decks may drop unexpectedly.
Forlift/lowermanifoldsolenoidandcontrolvalveservice
procedures, see 4WD Manifold Service in this section.
RefertoFigure112forlift/lowermanifoldcartridgevalve
and plug installation torque.
Hydraulic
System
To Next Page
Loading...
