Toro 30609 - Adjusting the Rollover Protection System (ROPS); Adjusting the Height of Cut

AdjustingtheRollover
ProtectionSystem(ROPS)
WARNING
Toavoidinjuryordeathfromrollover:keep
therollbarintheraisedlockedpositionand
usetheseatbelt.
Ensurethattheseatissecuredwiththeseat
latch.
WARNING
Thereisnorolloverprotectionwhentheroll
barisinthedownposition.
•Donotoperatethemachineonuneven
groundoronahillsidewiththerollbarin
thedownposition.
•Lowertherollbaronlywhenabsolutely
necessary.
•Donotweartheseatbeltwhentherollbar
isinthedownposition.
•Driveslowlyandcarefully.
•Raisetherollbarassoonasclearance
permits.
•Checkcarefullyforoverheadclearances
(i.e.,branches,doorways,electricalwires)
beforedrivingunderanyobjectsanddo
notcontactthem.
Important:Alwaysusetheseatbeltwhenthe
rollbarisintheraisedandlockedposition.Do
notusetheseatbeltwhentherollbarisinthe
loweredposition.
LoweringtheRollBar
Important:Lowertherollbaronlywhen
necessary.
Important:Ensurethattheseatissecuredwith
theseatlatch.
g033136
Figure20
RaisingtheRollBar
g033137
Figure21
AdjustingtheHeightofCut
FrontMowerDeck
Theheightofcutisadjustablefrom25to127mm(1
to5inches)in13mm(1/2inch)increments.T oadjust
theheightofcutonthefrontmowerdeck,position
thecaster-wheelaxlesintheupperorlowerholesof
thecasterforks,addorremoveanequalnumberof
spacersfromthecasterforks,andsecuretherear
chaintothedesiredhole.
29