Toro 31050 - Height Of Cut Valve

HeightOfCutValve
g293797
Figure84
1.Bracket4.Bolt7.Nut
2.Washer5.Washer
8.Operatorsplatform
3.Bolt
6.Heightofcutvalve
RemovingtheHeightOfCutValve
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
CAUTION
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page5–5).
2.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page5–63).
3.Locatetheheightofcutvalvethatisattachedtooperatorplatformunder
theoperatorseat(Figure84).
4.Forassemblypurposes,labelallthehydraulicconnections.Cleanthe
hydraulicconnectionsbeforelooseningthehydrauliclines.
HydraulicSystem:ServiceandRepairs
Page5–106
ProLineH800
19241SLRevB