Toro 74211 - Replace Front Wheel Bearings

CHASSIS
5 - 12 Mid-Mount Z Service Manual
Replace Front Wheel Bearings
1. Raise the front of the unit so that the front wheels
are off the ground.
2. Remove the through bolt holding the wheel to the
caster assembly (Figure 97).
Figure 97
1030-021
3. Remove the sleeve that passes through the wheel
bearings(Figure 98).
Figure 98
1030-023
4. Remove the 2 wheel spacers (Figure 99).
Figure 99
1030-024
5. Remove the bearing seal (Figure 100).
Figure 100
1030-022