Step
1
Removing Parts from the
Crate
No Parts Required
Procedure
R emo v e the tires and the par ts for the R OPS from
the shipping crate .
Step
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kP a)
Note: T he front caster wheel is a semi-pneumatic
tire and does not need to be c hec k ed.
Chec k the air pressure in the dri v e tires .
Figure 1
Step
3
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this step:
2
Rear wheels
Procedure
1. R emo v e the screws holding the right angle
retaining plate to the crate .
Figure 2
2. Raise the bac k of the mac hine up and suppor t
it with jac k-stands .
Figure 3
3. R emo v e the wheel n uts from both sides of the
v ehicle and remo v e the right angle retaining
plate . Discard the screws and retaining plate .
2
To Next Page
Loading...
