Toro 74253CP - Charging the Battery

Step
6
Charging the Battery
No Parts Required
Procedure
Charging the batter y pr oduces gasses that
can explode and cause serious injur y .
• K eep cigar ettes, spar ks and flames a w ay
fr om the batter y .
• Mak e sur e the ignition s witch is of f.
• V entilate when charging or using the
batter y in an enclosed space.
Important: Do not r un the machine with
the batter y disconnected; electrical dama ge
may occur to the engine.
Charg e the batter y . R efer to the Operator’ s Manual
for instr uctions .
Figure 11
Step
7
Checking the Machine for
Grease
Parts needed for this step:
1 tube
Number 2 general purpose lithium base
or molybdenum base grease. (Purchase
separately.)
Procedure
1. R emo v e the belt co v ers on domestic mac hines
as sho wn belo w .
Figure 12
2. R emo v e the belt co v ers and bolts on
inter national mac hines as sho wn belo w .
5