Toro 74490 - Right Console Replacement

RightConsoleReplacement
RightConsoleRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stopthe
engine,waitforallmovingpartstostop,andremovethekey.Engagethe
parkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Removetheshoulderbolt(T30)atthefrontoftheconsole.
g336084
Figure27
4.Removethe2boltsonthefrontoftheconsole.
5.Removethe2(T25)screwsfromtheconsolebracketontheundersideof
theconsole.
Note:Removingthedrivewheelmayalloweasieraccesstothetorxscrews.
6.Removethe2boltsfromthesupportbracket.
7.Removethehexscrewsecuringthecontrolpanelassemblytotheconsole.
8.Lifttheconsoleupwardoffofthemachine,whilefeedingthecontrolpanel
assemblythroughtheopeningintheconsole.
Note:Thecontrolpanelassemblyshouldbesupportedwhileservicingthe
machine,toavoiddamagetocablesorthewireharness.
2000SeriesZMASTER®ServiceManual
Page5–13
Chassis:ServiceandRepairs
3438-778RevA