Toro 74490 - Adjusting the Park Brake

ParkBrakeHandleAssemblyInstallation(continued)
g336060
Figure45
4.Securewithalockingcotterpin.
5.Cycletheparkbrakelevertoensurethatitlocksintheengagedposition.
6.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
AdjustingtheParkBrake
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stopthe
engine,waitforallmovingpartstostop,andremovethekey.Engagethe
parkingbrake.
2.Raiseandsupporttheunitsothatthedrivewheelsareofftheground.
3.Releasethedrivewheelbypassvalvessothatthedrivewheelsareable
tospinfreely.
4.Engageanddisengagethebrakeandcheckeachdrivetiretomakesurethat
thebrakeengagesanddisengages.
5.Ifadjustmentisnecessary,disengagetheparkbrake.Removethelocking
cotterpinfromtheupperbrakelinkage.
g336038
Figure46
2000SeriesZMASTER®ServiceManual
Page5–25
Chassis:ServiceandRepairs
3438-778RevA