MotionControlAssemblyRemoval(continued)
g337843
Figure51
7.Disconnectthemotioncontrolassemblyfromtheframe.
g336044
Figure52
8.Lowerthemotioncontrolassemblythroughtheframetowardthecenterof
themachine,removetheassembly.
MotionControlAssemblyInstallation
1.Positionthemotioncontrolassemblyinplacewiththelinkageextending
towardthetransmission.
2.Securethemotioncontrolassemblytotheframe.
3.Connectthemotioncontrollinkagetothetransmission.
4.Adjustthenutonthemotioncontrolassemblyuntilthemotioncontrolnutis
centeredinthecontrolplateslots.
2000SeriesZMASTER®ServiceManual
Page5–29
Chassis:ServiceandRepairs
3438-778RevA
To Next Page
Loading...
