Toro 74490 - Page 85

LevelingtheMowerDeck(continued)
g336159
Figure68
1.Block7.3cm(2.87inch)
2.Welds
BlockHeightandRakeTable
DeckSize
BlockHeightRake
AllMowerDeck
7.3cm(2.87inch)4.8-6.4mm(3/16-1/4inch)
13.Rotatethebladesside-to-sidesothattheyareparalleltotherearofthedeck.
14.Loosenthelevelingadjustmentlocknutsonall4cornerssothatthedeckis
sittingsquarelyontheblocks.
15.Removeanyslackfromthedeckhangersandmakesurethedeckliftfoot
leverispushedbackagainstthestop.
16.Tightenthe4levelingadjustmentlocknuts.
17.Verifythattheblockstsnuglyunderthedeckskirtandthatallattachment
boltsaretight.
18.Continuelevelingthedeckbycheckingthefronttorearbladeslope.
19.Recheckthelevelofthebladesandrepeatdecklevelingprocedureif
necessary.
20.For60inchdecksonly:
•Raisethedecktothetransportposition.
•Installtheliftassistspringadjustingscrew(removedinstep7above).
•Setthegapbetweenthespringandthebracketto22–29mm(7/8-1-1/8
inches).
21.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
2000SeriesZMASTER®ServiceManual
Page6–11
Deck:ServiceandRepairs
3438-778RevA