Toro 74492 - Motion-Control Linkage Adjustment; Adjusting Neutral Positioning Linkage

ThrottleCableAssemblyRemoval(continued)
g336055
Figure39
5.Removethe2boltsandnutssecuringthethrottlecontrolassemblytothe
controlpanelassembly.
6.Loosentheclampsecuringthethrottlecabletothethrottleplate.
g336056
Figure40
7.Removethethrottlecablefromthethrottleplate,notingthepositionofthe
cableintheplate.
8.Pullthethrottlecableassemblythroughtheconsoleandoutofthemachine.
ThrottleCableAssemblyInstallation
1.RoutethethrottlecablethroughtherightconsolebetweentheROPSand
thehydraulicuid.
2000SeriesZMASTER®ServiceManual
Page5–21
Chassis:ServiceandRepairs
3438-778RevA