Toro 74492 - Page 96

HydrostaticDriveTransmissionRemoval(continued)
g336197
Figure75
13.Disconnectthehydraulicuidhosefromthetopofthetransmission.
14.Removetheboltthatconnectsthetransmissiontothecrossshaft.
15.Removethe2frontandrearhydromountingbolts.
g336195
Figure76
1.FrontandRearMountingBolts3.AxleHornBolts
2.CrossShaft
16.Supportthetransmission,loosenandremovethetwoaxlehornnutsand
bolts.Lowerthetransmission.
HydrostaticDriveTransmissionInstallation
1.Liftandsupportthetransmission,andinstallthe2axlehornbolts,washers,
andnuts.Donotfullytightenthenutsatthistime.
2.Alignthecrossshaftandinstalltheboltthroughthetransmissionintothe
crossshaft.Donottightenatthistime.
DriveSystem:ServiceandRepairs
Page7–10
2000SeriesZMASTER®ServiceManual
3438-778RevA