Toro 74901 Z Master 5000 - Cutting Blade Servicing; Blade Installation

thesailareaonly(Figure97).Repeatthisprocedure
untilthebladeisbalanced.
Figure97
1.Blade2.Balancer
InstallingtheBlades
1.Installthebladeontothespindleshaft(Figure98).
Important:Thecurvedpartoftheblademustbe
pointingupwardtowardtheinsideofthemowerto
ensurepropercutting.
2.Installthespringdiskandbladebolt.Thespringdisk
conemustbeinstalledtowardthebolthead(Figure98).
Torquethebladeboltto85-110ft-lb(115-150N-m).
59