Toro 74991 Z Master Professional 5000 Series - Adjusting the Anti-Scalp Rollers

AdjustingtheHeight-of-CutPin
Adjusttheheight-of-cutfrom25to140mm(1to5-1/2
inches)in6mm(1/4inch)incrementsbymovingtheclevis
pinintodifferentholelocations.
1.MovethetransportlocktotheLOCKposition.
2.Pushonthedeck-liftpedalwithyourfootandraisethe
mowerdecktotheTransportposition(alsothe140
mmor5-1/2inchcutting-heightposition)asshown
inFigure26.
3.Toadjust,rotatethepin90degreesandremovethepin
fromtheheight-of-cutbracket(Figure27).
4.Selectaholeintheheight-of-cutbracketcorresponding
totheheight-of-cutdesired,andinsertthepin(Figure
27).
5.Pushonthedecklift,pullbackonthetransportlock,
andslowlylowerthemowerdeck.
Figure27
1.Deck-liftpedal
3.Transportlock
2.Height-of-cutpin
AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheightofcut,adjusttheheight
oftheanti-scalprollers.
1.Disengagetheblade-controlswitch(PTO),movethe
motion-controlleverstotheNEUTRAL-LOCKposition,
andsettheparkingbrake.
2.Shutofftheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
g029955
Figure28
1.Anti-scalproller4.Flangenut
2.Spacer
5.Bolt
3.Bushing
g029956
Figure29
1.Anti-scalproller3.Flangenut
2.Bushing4.Bolt
25