HYDRAULIC SYSTEM
4-21Z580/Z593/Z595 Diesel Service Manual
4
1. Insert the wheel motor into the frame. Loosely install
the 2 rear wheel motor mounting bolts, long spacers
and nuts (Fig. 311).
3. Loosely install the 2 front wheel motor mounting
bolts, short spacers and nuts (Fig. 313).
Fig 311 PICT-3377
Fig 313 PICT-3376
4. Torque the 4 wheel motor mounting bolts to 100 + 8
ft-lbs. (136 + 11 Nm) (Fig. 314).
2. Swing the brake linkage into position (Fig. 312).
Fig 314 PICT-3382
Fig 312 PICT-3374
To Next Page
Loading...
