MOWER DECKS
7-17Z580/Z593/Z595 Diesel Service Manual
7
22. Pack the tapered bearing with #2 grease and install
the tapered bearing (Fig. 750).
Fig 750 CLR DSC-2694
21. Install the inner spacer to the spindle assembly (Fig.
749).
Fig 749 CLR DSC-2700
19. Install the lower seal (Fig. 747).
Note: The open lip of the seal should be facing
outward.
Fig 747 CLR DSC-2692
20. Using a seal driver, drive or press the seal on the
lower end of the spindle housing until the seal is
fl ush with the outer edge of the housing (Fig. 748).
Fig 748 CLR DSC-2693
To Next Page
Loading...
