MOWER DECKS
7-79Z580/Z593/Z595 Diesel Service Manual
7
52. Install .013” (.33mm) thickness of shims onto the
open end cap (Fig. 979).
Note: The shim color corresponds to its thickness:
Blue: .005” (.127mm) thick
Green: .003” (.076mm) thick
Brown: .010” (.254mm) thick
54. Apply a protective fi lm onto the shaft keyway.
55. Install the open end cap assembly over the cross
shaft and onto the gearbox (Fig. 981).
Fig 979 IMG-8561
Fig 981 IMG-8559
56. Install 4 new bolts securing the open end cap to the
gearbox housing. Torque the bolts to 280 – 325 in-
lbs. (31.6 – 36.7 Nm) (Fig. 982).
Note: Tighten the bolts in a crisscross pattern.
53. Install a new end cap o-ring (Fig. 980).
Fig 982 IMG-8582a
Fig 980 IMG-8562
To Next Page
Loading...
