CHASSIS
3-54 Z580/Z593/Z595 Diesel Service Manual
3
6. Install the neutral return yoke onto the neutral return
bolt (Fig. 205).
Fig 205 PICT-3126
7. Position the left hand neutral return yoke to the left
hand motion control tab and install a clevis pin and
cotter pin (Fig. 206).
Fig 206 PICT-3124
4. Position the left hand control rod assembly into the
traction frame (Fig. 203).
Fig 203 PICT-3133
5. Install a bolt, washer and nut securing the left hand
control rod ball joint to the hydrostatic pump control
arm (Fig. 204).
Note: The washer is installed between the ball joint
and the control arm.
Fig 204 PICT-3131
To Next Page
Loading...
