Toro Diesel Z Master - Right Hand Motion Control

CHASSIS
3-55Z580/Z593/Z595 Diesel Service Manual
3
8. Tighten the jam nut to secure the neutral adjustment
yoke (Fig. 207).
Fig 207 PICT-3142
9. Slide a side fl ange bearing onto each end of the right
motion control assembly (Fig. 208).
Fig 208 PICT-3092a
10. Position the right hand motion control assembly and
control shaft arm assembly into position under the
traction frame (Fig. 209).
Fig 209 PICT-3088
11. Position the side fl ange bearing to the left hand
motion control assembly and loosely install 2 bolts
and nuts to secure the side fl ange bearing (Fig.
210).
Fig 210 PICT-3144
Right Hand Motion Control